Wallaroo Up has been tested on:
- Amazon Linux 2
- CentOS 7
- Oracle Linux 7
It should also work on Red Hat Enterprise Linux 7.
In order to compile the Wallaroo example applications, your system will need to have approximately 3 GB working memory (this can be RAM or swap). If you don’t have enough memory, you are likely to see that the compile process is
Killed by the OS.
Download Wallaroo Up script
curl https://raw.githubusercontent.com/WallarooLabs/wallaroo/0.6.1/misc/wallaroo-up.sh -o /tmp/wallaroo-up.sh -J -L
Run the Wallaroo Up script
-p <PATH> argument is optional and can be used to control where the Wallaroo tutorial is installed into (the default is
The script will require superuser privileges via
sudo and will throw an error if
sudo is not available. The script will prompt you prior to making any changes. It can optionally print out the commands it will run.
Follow the prompts to have Wallaroo Up install and configure Wallaroo and its dependencies.
Once Wallaroo Up has finished installing and configuring Wallaroo for your environment, it will also create an
activate script that can be used to set up the appropriate environment variables.
Awesome! All set. Time to try running your first application.
Validate your installation
In this section, we’re going to run an example Wallaroo application. By the time you are finished, you’ll have validated that your environment is set up and working correctly.
There are a couple of Wallaroo support applications that you’ll be interacting with for the first time:
- Our Metrics UI allows you to monitor the performance and health of your applications.
- Data receiver is designed to capture TCP output from Wallaroo applications.
You’re going to set up our “Alerts” example application. We will use an internal generator source to generate simulated inputs into the system. Data receiver will receive the output, and our Metrics UI will be running so you can observe the overall performance.
The Metrics UI process will be run in the background. The other two processes (data_receiver and Wallaroo) will run in the foreground. We recommend that you run each process in a separate terminal.
Starting new shells
For each Shell you’re expected to setup, you’d have to run the following to configure the Wallaroo environment:
This command will set up the environment variables for running Wallaroo Applications.
Let’s get started!
Since Wallaroo is a distributed application, its components need to run separately, and concurrently, so that they may connect to one another to form the application cluster. For this example, you will need 4 separate terminal shells to run the metrics UI, run a sink, run the Alerts application, and eventually, to send a cluster shutdown command.
Shell 1: Start the Metrics UI
To start the Metrics UI run:
You can verify it started up correctly by visiting http://localhost:4000.
If you need to restart the UI, run:
When it’s time to stop the UI, run:
If you need to start the UI after stopping it, run:
Shell 2: Run Data Receiver
We’ll use Data Receiver to listen for data from our Wallaroo application.
data_receiver --listen 127.0.0.1:5555 --no-write --ponythreads=1 --ponynoblock
Data Receiver will start up and receive data without creating any output. By default, it prints received data to standard out, but we are giving it the
--no-write flag which results in no output.
Shell 3: Run the “Alerts” Application
Now that we have the metrics UI and something our application can send output to up and running, we can run the application itself by executing the following command:
alerts_stateful --out 127.0.0.1:5555 \
--metrics 127.0.0.1:5001 --control 127.0.0.1:6000 --data 127.0.0.1:6001 \
--name worker-name --external 127.0.0.1:5050 --cluster-initializer \
This tells the “Alerts” application that it should write outgoing data to port
5555, and send metrics data to port
Check Out Some Metrics
Once the application has successfully initialized, the internal test generator source will begin simulating inputs into the system. If you visit the Metrics UI, the landing page should show you that the “Alerts” application has successfully connected.
If your landing page resembles the one above, the “Alerts” application has successfully connected to the Metrics UI.
Now, let’s have a look at some metrics. By clicking on the “Alerts” link, you’ll be taken to the “Application Dashboard” page. On this page you should see metric stats for the following:
- a single pipeline:
- a single worker:
- a single computation:
check transaction total
You’ll see the metric stats update as data continues to be processed in our application.
You can then click into one of the elements within a category to get to a detailed metrics page for that element. If we were to click into the
check transaction total computation, we’ll be taken to this page:
Feel free to click around and get a feel for how the Metrics UI is set up and how it is used to monitor a running Wallaroo application. If you’d like a deeper dive into the Metrics UI, have a look at our Monitoring Metrics with the Monitoring Hub section.
Shell 4: Cluster Shutdown
You can shut down the cluster with this command at any time:
You can shut down Data Receiver by pressing Ctrl-c from its shell.
You can shut down the Metrics UI with the following command: